HP 8000 s manual Toner Low Response

Message	Description	Recommended Action
TRANSFER KIT LOW	The transfer drum, transfer	Although printing can
REPLACE KIT	belt, cleaning roller, and	continue, the transfer kit
	charcoal filter are almost past	should be replaced for
	their specified life.	optimum printer operation. For
		more information on replacing
		the transfer kit, see the
		installation guide included
		with the transfer kit.
TRANSFER KIT OUT	The transfer drum, transfer	Replace the transfer kit and
REPLACE KIT	belt, cleaning roller, and	reset the transfer counter
	charcoal filter are past their	before attempting to print. For
	specified life.	more information on replacing
		the transfer kit and resetting
		the counter, see the
		installation guide included
		with the transfer kit. For more
		information on configuring the
		printer response to this
		message, see “Selecting
		Toner Low Response” in
		chapter 2.
TRAY 1 CONTAINS	Media was stacked in tray 1	Configure the media type for
UNKNOWN MEDIA	for continuous manual feed	tray 1 or remove the
	printing, and the job has been	remaining media. For more
	completed. However, there is	information on configuring the
	still media in the input tray.	media type, see “Printing from
	The printer considers the	Tray 1” in chapter 3.
	input tray not to be
	configured.
TRAY 1 LOAD	A user has requested a media	Load the media type and size
<Type> <Size>	size that is not currently	specified on the printer control
	installed in tray 1.	panel display. After the tray 1
		is loaded, the printer
	<Type> is the last media type	automatically brings itself
	configured for the input tray.	online.
	<Size> is the last media size
	configured for the input tray.	For more information on
		configuring the printer control
		panel or checking printer
		control panel settings, see
		chapter 2, “Using the Printer
		Control Panel.”

156 7 Printer Control Panel Messages EN