HP 8000 s manual Nvram

Message	Description	Recommended Action
66.X2.YY OUTPUT	Indicates a multi-bin mailbox	Verify that the communication
DEVICE FAILURE	error.	and power cables are
CHECK CABLES		connected. Press GO to
AND CYCLE POWER	X/YY Description	continue printing. If the
	X = Device number in the link	message persists, turn the
	YY = Error code from the	printer off and on to reset the
	optional device	printer.
67.X PRINTER	Indicates an electronic	Turn the printer off and on to
ERROR	controller error.	reset the printer. If the
POWER CYCLE		condition persists, contact a
	X = Description	local authorized HP dealer or
	1 = DC Controller Error	service representative for
	2 = DC Controller IC	service.
	Malfunction
	3 = Internal Communication
	Malfunction
68 NVRAM ERROR	Indicates that a recoverable	Verify the printer control panel
SETTINGS CHANGED	error has been detected in the	settings. One or more fields
	NVRAM (nonvolatile	might have been reset to their
	random-access memory).	factory defaults during the
		error recovery. For more
		information on factory
		defaults, see “Factory
		Defaults” in chapter 2.
68 NVRAM FULL	Indicates that the NVRAM is	Verify the printer control panel
SETTINGS LOST	full, and the printer is unable	settings. One or more fields
	to write new data to the	might have been reset to their
	NVRAM.	factory defaults during error
		recovery. The next time the
		printer is turned off and on,
		NVRAM will be cleared and all
		factory defaults will be
		restored. For more
		information on factory
		defaults, see “Factory
		Defaults” in chapter 2.

EN Printer Messages 137