HP 8000 s manual Problem Cause and Solution

Problem	Cause and Solution
Color toner carousel will	The power cord is not firmly plugged into both the
not rotate	printer and the power receptacle. Remove and
	reconnect the power cord. The printer must be turned
	on.
	Verify the clear door is closed, the imaging drum and
	black toner cartridge are installed (including removing
	the orange seal from the black toner cartridge and
	swinging the upper lever to the left), and the upper right
	door is closed.
The printer is on, but not	READY is not displayed on the printer control panel.
receiving data (Data light	Press GO to bring the printer online.
does not blink and
	The printer has lost communication with the network.
nothing prints)
	Turn the printer off and then turn the printer on to
	re-establish the connection.
	The network cable is not correct for the network
	operating system. Select the correct network cable for
	the network operating system. For more information,
	see the getting started guide.

EN Printer Response Problems 175