HP 8000 s Orienting Media for All Other Trays, Media Orientation for Printing Prepunched Paper

Orienting Media for All Other Trays

Figure 10

Place the media into the input tray with the side to be printed on face down (see figure 10) for single-sided printing.

Load letterhead with the top toward the rear of the input tray.

Figure 11

zLoad letter and A4 paper with the front side up and the top, short edge toward the rear of the tray for double-sided printing.

zLoad other sizes with the front side up and the top, short edge toward the right of the tray for double-sided printing.

Media Orientation for Printing Prepunched Paper

When printing with prepunched paper, always load the paper with the holes toward the printer for tray 1 (see figure 8). Load the prepunched paper with the holes toward the right of the printer for trays 2, 3, and 4 (see figure 10). When printing on both sides of prepunched paper, you must select prepunched paper as the paper type in the Paper Handling menu from the control panel and select prepunched paper from your printer driver.

Note	When printing on both sides of prepunched paper with stapling
	enabled, the staple will be in the lower right corner of your print job.

EN Printing from Tray 1 79