3.Carefully unwind the wire harness (callout 1) from the retainer on the gear cover (callout 2), and then remove the cover.

Reinstallation tip When you reinstall the gear cover, make sure that you wrap the solenoid-wire harness around the retainer on and on-half times in a clockwise direction.

Figure 2-108Cassette pickup (Tray 2) or Tray 1 (multipurpose tray) solenoid (2 of 3)

1

2

4.For the cassette (Tray 2) pickup solenoid: Remove one screw (callout 1), and then remove the solenoid (callout 2).

For the Tray 1 (multipurpose tray) pickup solenoid: Remove one screw (callout 3), and then remove the solenoid (callout 4).

Figure 2-109Cassette pickup (Tray 2) or Tray 1 (multipurpose tray) solenoid (3 of 3)

43

2

1

116 Chapter 2 Removal and replacement

ENWW