9.Place the product face-side up. Remove two screws (callout 1), and then remove the positioning guide (callout 2).

CAUTION: When you place the product face-side up, do not damage the rear-door link arm on the left side of the product.

NOTE: The positioning guide might appear to still be fastened to the product. You might have to use slight force to separate it form the product.

Figure 2-123Remove the high-voltage power supply (8 of 11)

1

2

10.Remove two screws (callout 1), and then remove the plate (callout 2). Figure 2-124Remove the high-voltage power supply (9 of 11)

1

2

 

ENWW

Removal and replacement procedures 125