Tray 1 (multipurpose tray) cover

1.Before proceeding, remove the following components:

●Rear-door assembly. See Rear-door assembly on page 62.

●Left cover. See Left cover on page 66.

2.Carefully release two retaining arms (callout 1). Figure 2-34Remove Tray 1 cover (1 of 3)

1

3.Slightly lower the cover, and then slide it toward the left side of the product.

TIP: If you lower the tray too far, it will not slide off of the hinge pins.

Figure 2-35Remove Tray 1 cover (2 of 3)

ENWW

Removal and replacement procedures 69