Table
Control panel message | Description | Recommended action |
|
|
|
Request accepted please wait | The request to print an internal page is |
| waiting to print. |
Wait for the current job to finish printing.
Restoring factory settings | Factory settings are being restored. | No action is necessary. |
|
|
|
Restoring... | The specific settings are being restored. | No action is necessary. |
|
|
|
RFU LOAD ERROR | An error occurred during a firmware upgrade. | Resend the firmware upgrade. |
SEND RFU UPGRADE ON USB DEV PORT |
|
|
|
|
|
ROM DISK DEVICE FAILURE | The specified device has failed. | Press the OK button to continue. |
To clear press OK |
|
|
ROM DISK FILE OPERATION FAILED To clear press OK
A command attempted an illogical operation. Press the OK button to continue.
ROM DISK FILE SYSTEM IS FULL | The specified file system is full and cannot be | Press the OK button to continue. | |
To clear press OK | written to. |
|
|
|
|
| |
|
|
| |
ROM DISK IS WRITE PROTECTED | The device cannot be written to. | Press the OK button to continue. | |
To clear press OK |
|
|
|
|
|
| |
SANITIZING DISK <X>% COMPLETE | A hard disk is being sanitized. | No action is necessary. | |
Do not power off |
|
|
|
alternates with |
|
|
|
SANITIZING DISK <X>% COMPLETE |
|
|
|
For help press |
|
|
|
|
|
| |
SIZE MISMATCH IN TRAY X | The tray indicated is loaded with a different | Load the tray with the size configured for the | |
For help press | size of paper than the size configured for the | tray. |
|
tray. | Make sure that the guides are positioned | ||
alternates with |
| ||
| correctly in the specified tray. Printing can | ||
<Current status message> |
| continue from other trays. | |
|
|
| |
|
| 1. | Make sure that connectors J513, J507, |
|
|
| and J501 are fully seated on the high- |
|
|
| voltage power supply. |
|
| 2. | Make sure that connector J601 is fully |
|
|
| seated on the ECU. |
|
| 3. | If the error persists, replace the high- |
|
|
| voltage power supply. |
|
| 4. | If the error persists, replace the ECU. |
|
|
| |
Sleep mode on | The product is in Sleep mode. | No action is necessary. | |
|
|
| |
SUPPLY MEMORY WARNING | The product cannot read the memory in the | If you believe you purchased a genuine HP | |
Economode disabled | print cartridge. | supply, go to www.hp.com/go/ | |
| |||
|
|
|
|
212 Chapter 3 Solve problems | ENWW |