Front-right and right-side cover assembly

1.Before proceeding, remove the following components:

●DIMM cover. See DIMM cover and DIMM on page 57.

●Formatter cover. See Formatter cover and formatter PCA on page 60.

●Cartridge-door assembly. See Cartridge-door assembly on page 71.

NOTE: The figures in this section show the cartridge-door assembly installed. However, it might be easier to reinstall the front-right and right-side cover assembly if the cartridge-door assembly is removed.

● Control panel. See Control panel on page 74.

2.Remove two screws (callout 1).

Figure 2-46Remove the front-right and right-side cover assembly (1 of 6)

1

76 Chapter 2 Removal and replacement

ENWW