I/O menu

Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server.

For more information on these options, see the product user guide.

To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the I/

Omenu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Item

Sub-item

Values

Description

 

 

 

 

I/O TIMEOUT

 

Range: 5 - 300

Set the product I/O TIMEOUT in

 

 

 

seconds. The default is 15

 

 

 

seconds.

 

 

 

Adjust timeout for the best

 

 

 

performance. If data from other

 

 

 

ports appears in the middle of your

 

 

 

print job, increase the timeout

 

 

 

value.

EMBEDDED JETDIRECT MENU See the next table for a list of options.

EIO <X> JETDIRECT MENU

Embedded Jetdirect and EIO <X> Jetdirect menus

Item

Sub-item

Sub-item

Values

Description

 

 

 

 

 

INFORMATION

PRINT SEC PAGE

 

YES*

YES: Prints a page that contains the current

 

 

 

NO

security settings on the HP Jetdirect print

 

 

 

server.

 

 

 

 

NO: A security settings page is not printed.

 

 

 

 

 

TCP/IP

ENABLE

 

ON*

ON: Enable the TCP/IP protocol.

 

 

 

OFF

OFF: Disable the TCP/IP protocol.

 

 

 

 

 

 

HOST NAME

 

 

An alphanumeric string, up to 32 characters,

 

 

 

 

used to identify the product. This name is

 

 

 

 

listed on the HP Jetdirect configuration page.

 

 

 

 

The default host name is NPIxxxxxx, where

 

 

 

 

xxxxxx is the last six digits of the LAN

 

 

 

 

hardware (MAC) address.

 

 

 

 

 

ENWW

Tools for troubleshooting 187