Menu item | Values | Description | |
|
|
|
|
AT VERY LOW | BLACK CARTRIDGE | STOP |
PROMPT TO CONTINUE
CONTINUE*
Select what the product should do when the print cartridge is very near the end of its estimated life.
STOP: The product stops until you replace the cartridge.
|
| PROMPT TO CONTINUE: The |
|
| product stops until you clear the |
|
| prompt message. |
|
| CONTINUE: The product |
|
| provides an alert message, but it |
|
| continues printing. |
|
|
|
USER DEFINED LOW | BLACK CARTRIDGE | Use the arrow buttons or the |
|
| numeric keypad to enter the |
|
| percentage of estimated |
|
| cartridge life at which you want |
|
| the product to alert you. |
|
|
|
Configure device menu
Use the CONFIGURE DEVICE menu for the following tasks:
●Change the default printing settings.
●Adjust the print quality.
●Change the system configuration and I/O options.
●Reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and override the values set from this menu.
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the PRINTING menu.
NOTE: Values that have an asterisk (*) are the
Menu item | Values | Description | |
|
|
| |
COPIES | Range: 1 - 32000 | Set the default number of copies for print | |
|
|
| jobs. The default number is 1. |
|
|
| |
DEFAULT PAPER SIZE | A list of available sizes appears. | Set the default paper size. | |
|
|
|
|
DEFAULT CUSTOM PAPER SIZE | ● | UNIT OF MEASURE | Set the default size for any custom print job. |
| ● | X DIMENSION |
|
| ● | Y DIMENSION |
|
|
|
|
|
178 Chapter 3 Solve problems | ENWW |