Cartridge-door assembly

1.Before proceeding, remove the following components:

●Rear-door assembly. See Rear-door assembly on page 62.

●Left cover. See Left cover on page 66.

●Tray 1 (multipurpose tray) cover. See Tray 1 (multipurpose tray) cover on page 69.

TIP: The cartridge-door assembly can be removed without removing the Tray 1 cover. However, it is easier to remove and reinstall the door assembly when the Tray 1 cover is not installed.

2.Remove one spring (callout 1).

Figure 2-37Remove the cartridge-door assembly (1 of 3)

1

ENWW

Removal and replacement procedures 71