Item | Values | Description | ||
|
|
|
|
|
| IPV4 SETTINGS | CONFIG METHOD | BOOTP | Specify the method that TCP/IPv4 |
|
|
| DHCP* | parameters are configured on the |
|
|
| HP Jetdirect print server. | |
|
|
| AUTO IP | BOOTP: Automatic configuration from a |
|
|
| MANUAL | BootP (Bootstrap Protocol) server. |
|
|
|
| |
|
|
|
| DHCP: Automatic configuration from a |
|
|
|
| DHCPv4 (Dynamic Host Configuration |
|
|
|
| Protocol) server. If selected and a DHCP |
|
|
|
| lease exists, the DHCP RELEASE and |
|
|
|
| DHCP RENEW menus are available to set |
|
|
|
| DHCP lease options. |
|
|
|
| AUTO IP: Automatic |
|
|
|
| addressing. An address in the form |
|
|
|
| 169.254.x.x is assigned automatically. |
|
|
|
| MANUAL: Use the MANUAL SETTINGS |
|
|
|
| menu to configure TCP/IPv4 parameters. |
|
|
|
|
|
|
| MANUAL | IP ADDRESS | (Available only if the CONFIG METHOD |
|
| SETTINGS | SUBNET MASK | menu is set to the MANUAL option) |
|
|
| Configure parameters directly from the | |
|
|
| DEFAULT | product control panel: |
|
|
|
| |
|
|
| GATEWAY | IP ADDRESS: The unique IP address |
|
|
|
| (n.n.n.n) of the product, where n is a value |
|
|
|
| from 0 to 255. |
|
|
|
| SUBNET MASK: The subnet mask (n.n.n.n) |
|
|
|
| for the product, where n is a value from 0 to |
|
|
|
| 255. |
|
|
|
| DEFAULT GATEWAY: The IP address of the |
|
|
|
| gateway or router used for communications |
|
|
|
| with other networks. |
|
|
|
|
|
|
| DEFAULT IP | AUTO IP* | Specify the IP address to default to when the |
|
|
| LEGACY | print server is unable to obtain an IP address |
|
|
| from the network during a forced TCP/IP | |
|
|
|
| reconfiguration (for example, when manually |
|
|
|
| configured to use BootP or DHCP). |
|
|
|
| NOTE: This feature assigns a static IP |
|
|
|
| address that might interfere with a managed |
|
|
|
| network. |
|
|
|
| AUTO IP: A |
|
|
|
| is set. |
|
|
|
| LEGACY: The address 192.0.0.192 is set, |
|
|
|
| consistent with older HP Jetdirect products. |
|
|
|
|
|
|
| DHCP RELEASE | YES | Specify whether to release the current DHCP |
|
|
| NO* | lease and the leased IP address. |
|
|
| NOTE: This menu displays if the CONFIG | |
|
|
|
| |
|
|
|
| METHOD is set to the DHCP option and a |
|
|
|
| DHCP lease for the print server exists. |
|
|
|
|
|
188 Chapter 3 Solve problems | ENWW |