11.Remove three screws (callout 1), and then remove the high-voltage power supply (callout 2).

NOTE: Disconnect two connectors and one FFC (callout 3) on the HPVS as you separate the it from the product.

Figure 2-125Remove the high-voltage power supply (10 of 11)

1

3

2

12.After the high-voltage power supply is removed, make sure that the spring on the chassis is in place.

CAUTION: This spring is not captive and can easily be lost.

Figure 2-126Remove the high-voltage power supply (11 of 11)

126 Chapter 2 Removal and replacement

ENWW