Control panel

WARNING! ESD sensitive component.

1.Before proceeding, remove the following components:

●DIMM cover. See DIMM cover and DIMM on page 57.

●Formatter cover. See Formatter cover and formatter PCA on page 60.

2.Press the cartridge-door release button, and then open the cartridge door. Make sure that the door is completely open.

Figure 2-42Remove the control panel (1 of 4)

3.Disconnect one connector (callout 1), and then remove one screw (callout 2). Figure 2-43Remove the control panel (2 of 4)

1

2

74 Chapter 2 Removal and replacement

ENWW