Table
Control panel message | Description | Recommended action |
|
|
|
CLOSE REAR DOOR | This message appears on the |
| display, but the rear door is closed. |
1.Make sure that the connectors J8001 and J1505 are fully seated on the ECU.
2.Use the J Rear cover open sensor test in the MANUAL SENSOR TEST menu (in the DIAGNOSTICS menu), to check the rear door sensor functionality. If necessary, replace the sensor (PS8001).
CLOSE TOP COVER | This message appears on the | 1. Make sure that connectors FT1 and FT2 | |
| display, but the cartridge door is closed. |
| are fully seated on the cartridge door |
|
|
| switch SW501. |
|
| 2. | Make sure that the tab on the cartridge |
|
|
| door that activates the switch is not |
|
|
| missing or damaged. Replace the |
|
|
| |
|
| 3. | Replace the door switch (SW501). |
|
|
| |
CODE CRC ERROR | An error occurred during a firmware upgrade. | Resend the firmware upgrade. | |
SEND RFU UPGRADE ON USB DEV PORT |
|
|
|
|
|
| |
DATA RECEIVED | The product is waiting for the print command. | Press the OK button to continue. | |
To print last page press OK |
|
|
|
alternates with |
|
|
|
<Current status message> |
|
|
|
|
|
| |
DATE/TIME = YYYY/MMM/DD HH:MM | The current date and time. | Set the date and time or press the stop button | |
To change press OK |
|
| to skip. |
|
|
| |
To skip press |
|
|
|
|
|
| |
Deleting... | Product is deleting a stored job. | No action is necessary. | |
|
|
| |
DUPLEX OPERATION FAILED | A timing error has occurred during a duplex | Press the OK button to continue printing. If | |
To continue press OK | printing job. | the error occurs again, cancel the job and | |
| print it as a | ||
alternates with |
|
|
|
DUPLEX OPERATION FAILED |
|
|
|
For help press |
|
|
|
|
|
| |
EIO <X> DISK NOT FUNCTIONAL | The EIO disk in slot X is not working correctly. | 1. Turn the product off. | |
For help press |
| 2. Make sure the EIO disk is inserted | |
|
|
| correctly and securely fastened. |
|
| 3. | If the control panel message continues |
|
|
| to appear, replace the disk. |
|
|
| |
EIO <X> DISK SPINNING UP | The disk accessory in EIO slot [X] is | No action is necessary. | |
alternates with | initializing. |
|
|
|
|
| |
<Current status message>
208 Chapter 3 Solve problems | ENWW |