Tray 2, Tray 3, or Tray 4 pickup roller

CAUTION: Do not touch the surface of the roller. Skin oils deposited on the roller might cause print- quality problems.

NOTE: If you did not remove the Tray 2, Tray 3, or Tray 4 cassette before servicing the product, remove it now.

1.Carefully place the product front-side up, so that you can see into the opening where the cassette would be installed.

NOTE: Debris can scratch or damage the back of the product. Before you place the product front- side up, remove any debris from the work surface. If possible, set the product on a clean, dry cloth to prevent scratching and damage.

2.Release the roller bushing, rotate the busing up, and then slide the bushing off of the roller shaft. Figure 2-64Remove the Tray 2, Tray 3, or Tray 4 pickup roller (1 of 3)

88 Chapter 2 Removal and replacement

ENWW