HP P3010 NOTE:, Figure, Figure, Reinstallation tip, To remove the bracket only:

3.To remove the bracket only:: Slide the sheet-metal bracket up to release it, and then remove the bracket.

NOTE: You might need to slightly pull outward on the lower-right cover (callout 1) to release the sheet-metal bracket.

Reinstallation tip When you reinstall the bracket, make sure that the tab (callout 2) is engaged in the slot in the chassis.

Figure 2-53Remove the lower-right cover (2 of 4)

2

1

4.Raise the right side of the product, slide the lower-right cover toward the back of the product, and then rotate the cover away from the product.

Figure 2-54Remove the lower-right cover (3 of 4)

ENWW Removal and replacement procedures 81