CHAPTER 7 PCI CONTROLLER
400 Preliminary User’s Manual S15543EJ1V0UM
7.5.16 P_PPCR (PCI Power Control Register)This register is used to control the power state for PPMI.See 7.6 Information for Software for further details.
R/WBits Field
Internal
bus
PCI
Default Description
31 PMRDY R/W R 0 Power Management Ready.
‘1’ indicates that the transition of power state has been done.
When PCI-Host writes to PowerState field of PMCSR register in
Configuration Space, this bit is reset to ‘0’. the VR4120A should
be set ‘1’ to this bit after the transition of power state has been
done.
30 PMERQ W - 0 PME# issue.
This bit is only writeable from Internal bus-side.
The PCI Controller asserts PME# signal when ‘1’ is written to this
bit.
If PCI-Host want to clear PME# asserting, it should write ‘1’ to
PME_Status bit in PMCSR register, or disable PME_En bit in
PMCSR register. See 7.6 for further details.
29:4 Reserved - - 0 Hardwired to ‘0’s.
3 PMRQ0 R/W R 0 The transition to D0 power state issued.
‘1’ indicates that PCI-Host issues the transition to D0 state.
The VR4120A should write ‘1’ to this bit in order to clear after the
recognition that this bit is set.
2 PMRQ1 R/W R 0 The transition to D1 power state issued.
‘1’ indicates that PCI-Host issues the transition to D1 state.
The VR4120A should write ‘1’ to this bit in order to clear after the
recognition that this bit is set.
1 Reserved - - 0 Hardwired to a ‘0’.
0 PMRQ3 R/W R 0 The transition to D3 power state issued.
‘1’ indicates that PCI-Host issues the transition to D3 state.
The VR4120A should write ‘1’ to this bit in order to clear after the
recognition that this bit is set.
7.5.17 P_SWRR (Software Reset Register)This register is used for Software Reset and can be written only from PCI-side. Writing any value to this registercauses the Software Reset. When this register is written, the SRREQ bit in P_IGSR register will be set and an internalinterrupt will be asserted to the VR4120A. The VR4120A is responsible to execute reset-operations (for example,asserting warm-reset to all blocks).
R/WBits Field
Internal
bus
PCI
Default Description
31:0 SWRS - W - This register is wri te-only.