*OPT (Option Identification)Query *OPT?
The *OPT query identifies the software installed in the 1660-series logic
analyzer. This query returns nine parameters. The first parameter indicates
whether you are in the system. The next two parameters indicate any
software options installed, and the next parameter indicates whether
intermodule is available for the system. The last five parameters list the
installed software for the modules in slot A through E for an 16500A logic
analysis mainframe. However, the 1660-series logic analyzers have only two
slots (A and B); therefore, only the first and second parameters of the last
five parameters will be relevant. A zero in any of the last eight parameters
indicates that the corresponding software is not currently installed. The
name returned for software options and module software is the same name
that appears in the field in the upper-left corner of the menu for each option
or module.
Returned Format {SYSTEM},{<option>|0},{<option>|0},{INTERMODULE|0},{<module>|0}
,{<module>|0},{<module>|0},{<module>|0},{<module>|0}<NL>
<option> Name of software option.
<module> Name of module software.
Example OUTPUT XXX;"*OP T?"
Common Commands
*OPT (Option Identification)
8–12