Examples OUTPUT XXX;":MMEM :STOR ’DEFAULTS’,’SETUPS FOR ALL MODULES’"
OUTPUT XXX;": MMEMORY:STOR E:CONFIG ’STATEDATA’,INTERNAL0,
’ANALYZER 1 C ONFIG’,1"
The appropriate module designator "_X" is added to all files when they are
stored. "X" refers to either an __ (double underscore) for the system or an _A
for the logic analyzer.
UPLoad
Query :MMEMory:UPLoad? <name>[,<msus>]
The UPLoad query uploads a file. The <name> parameter specifies the file to
be uploaded from the disk. The contents of the file are sent out of the
instrument in block data form.
This command should only be used for 16550A or 1660-series configuration files.
<name> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
<msus> Mass Storage Unit Specifier (not needed by 1660-series. 16500A <msus> is
accepted but no action is taken).
Returned Format [:MMEMory:UPLoad] <block_data><NL>
MMEMory Subsystem
UPLoad
11–20