RECord Command :WAVeform:RECord {FULL|WINDow}
The RECord command specifies the data you want to receive over the bus.
The choices are FULL or WINdow. When FULL is chosen, the entire 8000
point record of the specified channel is transmitted over the bus. In WINdow
mode, only the data displayed on screen will be returned.
Example OUTPUT XXX;":WAV:SOUR CHAN1;REC FULL"
Query :WAVeform:RECord?
The RECord query returns the present mode chosen.
Returned Format [:WAVeform:RECord] {FULL|WINDow}<NL>
Example OUTPUT XXX;":WA VEFORM:RECOR D?"
SOURce
Command :WAVeform:SOURce CHANnel<N>
The SOURce command specifies the channel that is to be used for all
subsequent waveform commands.
<N> An integer from 1 to 2
Example OUTPUT XXX;":WA VEFORM:SOURC E CHANNEL1"
WAVeform Subsystem
RECord
35-12