Introduction
SYSTem subsystem commands control functions that are common to
the entire 1660-Series logic analysis system, including formatting
query responses and enabling reading and writing to the advisory line
of the instrument. The command parser in the 1660-series logic
analyzer is designed to accept programs written for the 16500A logic
analysis system with a 16550A logic analyzer module and a 16532A
oscilloscope module.
Refer to figure 10-1 and table 10-1 for the System Subsystem
commands syntax diagram. The SYSTem Subsystem commands are:
•DATA
•DSP
•ERRor
•HEADer
•LONGform
•PRINt
•SETup
10–2