FORMat
Command :WAVeform:FORMat {BYTE|WORD|ASCii}
The FORMat command specifies the data transmission mode of waveform
data over the remote interface.
Example OUTPUT XXX;":WA V:FORM WORD"
Query :WAVeform:FORMat?"
The FORMat query returns the currently specified format.
Returned Format [:WAVeform:FORMat]{BYTE|WORD|ASCii}<NL>
Example OUTPUT XXX;":WA VEFORM:FORMA T?"
POINts?
Query :WAVeform:POINts?
When WAVeform RECord is set to FULL, the POINts query always returns a
value of 8000 points. When WAVeform RECord is set to WINdow, then the
query returns the number of points displayed on screen.
Returned Format [:WAVeform:POINts] <points><NL>
<points> number of points depending on the setting of the WAVeform RECord
command
Example OUTPUT XXX;":WA VEFORM:POINT S?"
WAVeform Subsystem
FORMat
35-10