Examples OUTPUT XXX;":MMEM ORY:PURGE ’FILE1’"
OUTPUT XXX;": MMEM:PURG ’FILE1’,INTERNAL0"
Once executed, the purge command permanently erases all the existing
information about the specified file. After that, there is no way to retrieve the
original information.
REName
Command :MMEMory:REName <name>[,<msus>],<new_name>
The REName command renames a file on the disk in the drive. The <name>
parameter specifies the filename to be changed and the <new_name>
parameter specifies the new filename.
You cannot rename a file to an already existing filename.
<name> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
<msus> Mass Storage Unit Specifier (not needed by 1660-series. 16500A <msus> is
accepted but no action is taken).
<new name> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
MMEMory Subsystem
REName
11–18