Introduction
The WLISt subsystem contains the commands available for the
Timing/State mixed mode display. The X and O markers can only be
placed on the waveforms in the waveform portion of the Timing/State
mixed mode display. The XSTate and OSTate queries return what
states the X and O markers are on. Because the markers can only be
placed on the timing waveforms, the queries return what state (state
acquisition memory location) the marked pattern is stored in.
In order to have mixed mode, one machine must be a state analyzer with time
tagging on (use MACHine<N>:STRigger:TAG TIME).
The WLISt subsystem commands are:
•DELay
•INSert
•LINE
•OSTate
•OTIMe
•RANGe
•REMove
•XOTime
•XSTate
•XTIMe
14–2