XAUTo
Command :MARKer:XAUTo{MANual|CHANnel<N>,

<type>,<level>,<slope>,<occurrence>}

The XAUTo command specifies the automatic placement specification for
the X marker. The first parameter specifies if automarker placement is to be
in the Manual mode or on a specified channel. If a channel is specified, four
other parameters must be included in the command syntax. The four
parameters are: marker type, level, slope and the occurrence count.
<N> An integer from 1 to 2
<type> ABSolute or PERCent
<level> percentage of waveform voltage level, ranging from 10 to 90 of the Vtop to
Vbase voltage or a voltage level
<slope> POSitive or NEGative
<occurrence> integer from 1 to 100
Example OUTPUT XXX;":MARKER:XAUTO CHANNEL1,ABS,4.75,POSITIVE,5"
Query :MARKer:XAUTo?
The XAUTo query returns the current settings.
Returned Format [:MARKer:XAUTo] CHANnel
<N>,<type>,<level>,<slope>,<occurrence><NL>
Example OUTPUT XXX;":MA RKER:XAUTO?"
If <type> is not specified, the marker type will default to PERCent.
MARKer Subsystem
XAUTo
31-18