Lockout Command
To lockout the front-panel controls, use the SYSTem command LOCKout.
When this function is on, all controls (except the power switch) are entirely
locked out. Local control can only be restored by sending the :LOCKout OFF
command.
Hint Cycling the power will also restore local control, but this will also reset
certain RS-232C states. It also resets the logic analyzer to the power-on
defaults and purges any acquired data in the acquisition memory of all the
installed modules.
See Also For more information on this command see chapter 10, "System Commands."
Programming Over RS-232C
Lockout Command
3–11