TLISt
Selector :MACHine{1|2}:TLISt
The TLISt selector is used as part of a compound header to access those
settings normally found in the Timing Listing menu. It always follows the
MACHine selector because it selects a branch directly below the MACHine
level in the command tree.
Example OUTPUT XXX;":MA CHINE1:TLIST :LINE 256"
COLumn
Command :MACHine{1|2}:TLISt:COLumn

<col_num>[,<module_num>,

MACHine{1|2}],<label_name>,<base>

The COLumn command allows you to configure the timing analyzer
list display by assigning a label name and base to one of the 61 vertical
columns in the menu. A column number of 1 refers to the left most column.
When a label is assigned to a column it replaces the original label in that
column.
When the label name is "TAGS," the TAGS column is assumed and the next
parameter must specify RELative or ABSolute.
A label for tags must be assigned in order to use ABSolute or RELative state
tagging.
TLISt Subsystem
TLISt
24–7