Table 4-2 (continued)
Alphabetic Command Cross-Reference (continued)
Command Set Organization
The command set for the 1660-series logic analyzers is divided into 28
separate groups: common commands, mainframe commands, system
commands and 23 sets of subsystem commands. Each of the 28 groups of
commands is described in a seperate chapter in Parts 2 through 4,
"Commands." Each of the chapters contain a brief description of the
subsystem, a set of syntax diagrams for those commands, and finally, the
commands for that subsystem in alphabetical order. The commands are
shown in the long form and short form using upper and lowercase letters. As
an example AUToload indicates that the long form of the command is
AUTOLOAD and the short form of the command is AUT. Each of the
commands contain a description of the command, its arguments, and the
command syntax.
Command Subsystem
VMAX MEASure
VMIN MEASure
VMODe MARKer
VOLume MMEMory
VOTime MARKer
VPP MEASure
VRUNs SLISt, TLISt, TWAVeform, MARKer
VTOP MEASure
VXTime MARKer
WIDTh SYMBol
XAUTo MARKer
XCONdition TLISt, TWAVeform
XINCrement WAVeform
XORigin WAVeform
XOTag SLISt, TLISt
XOTime SLISt, TLISt, TWAVeform, WLISt, MARKer
XPATtern SLISt, TLISt, TWAVeform
XREFerence WAVeform
XSEarch SLISt, TLISt, TWAVeform
Command Subsystem
XSTate SLISt, TLISt, WLISt
XTAG S LISt, TLISt
XTIMe TWAVeform, WLISt, MARKer
YINCrement WAVeform
YORigin WAVeform
YREFerence WAVeform
Programming and Documentation Conventions
Command Set Organization
4–14