Agilent Technologies 1660A, 1660AS Configuring the Logic Analzer Interface

Figure 3-4 shows the schematic of a 9-pin female to 25-pin male cable. The
following cables support this configuration:
•HP 24542G, DB-9(F) to DB-25(M), 3 meter
•HP 24542H, DB-9(F) to DB-25(M), 3 meter, shielded
•HP 45911-60009, DB-9(F) to DB-25(M), 1.5 meter
Figure 3-4
9-pin (F) to 25 -pin (M) Cable
Configuring the Logic Analzer Interface
The RS-232C menu field in the System Configuration Menu allows you access
to the RS-232C Configuration menu where the RS-232C interface is
configured. If you are not familiar with how to configure the RS-232C
interface, refer to the Agilent Technologies 1660-Series Logic Analyzer
User’s Reference.
Programming Over RS-232C
Configuring the Logic Analzer Interface
3–8