Table 18-1 SWAVeform Parameter Values
Parameter Value
number_of_samples integer from −8191 to +8191
label_name string of up to 6 alphanumeric characters
bit_id {OVERlay|<bit_num>|ALL}
bit_num integer representing a label bit from 0 to 31
range_values integer from 10 to 5000 (representing (10 × states/Division))
mark_type {X|O|XO|TRIGger}
percent integer from 0 to 100
SWAVeform
Selector :MACHine{1|2}:SWAVeform
The SWAVeform (State Waveform) selector is used as part of a compound
header to access the settings in the State Waveform menu. It always follows
the MACHine selector because it selects a branch directly below the
MACHine level in the command tree.
Example OUTPUT XXX;":MA CHINE2:SWAVE FORM:RANGE 40"
SWAVeform Subsystem
SWAVeform
18–4