COUNt
Command :ACQuire:COUNt <count>
The COUNt command specifies the number of acquisitions for the running
weighted average. This command generates an error if Normal acquisition
mode is specified.
<count> {2|4|8|16|32|64|128|256}
Example OUTPU T XXX;":ACQUIR E:COUNT 16"
Query :ACQuire:COUNt?
The COUNt query returns the last specified count.
Returned Format [:ACQuire:COUNt] <count><NL>
Example OUTPU T XXX;":ACQ:CO UN?"
TYPE
Command :ACQuire:TYPE {NORMal|AVERage}
The TYPE command selects the type of acquisition that is to take place
when a DIGitize or STARt command is executed. One of two acquisition
types may be chosen: the NORMal or AVERage mode.
Example OUTPU T XXX;":ACQUIR E:TYPE NORMAL"
ACQuire Subsystem
COUNt
28-4