CLEar
Command :MACHine{1|2}:COMPare:CLEar
The CLEar command clears all "don’t cares" in the reference listing and
replaces them with zeros except when the CLEar command immediately
follows the SET command (see SET command).
Example OUTPUT XXX;":MA CHINE2:COMPA RE:CLEAR"
CMASk
Command :MACHine{1|2}:COMPare:CMASk

<label_name>,<care_spec>

The CMASk (Compare Mask) command allows you to set the bits in the
channel mask for a given label in the compare listing image to "compares" or
"don’t compares."
<label_name> A string of up to 6 alphanumeric characters
<care_spec> A string of characters "{*|.}..." (32 characters maximum)
<*> An indicator that tells the logic analyzer that it cares about this bit.
<.> An indicator that tells the logic analyzer that it does not care about this bit
(don’t care).
Example OUTPUT XXX;":MA CHINE2:COMPA RE:CMASK ’DATA’, ’*.**.. **’"
COMPare Subsystem
CLEar
20–5