HTIMe
Query :HTIMe?
The HTIMe query returns a value representing the internal hardware skew in
the Intermodule configuration. If there is no internal skew, or if intermodule
bus is not configured, 9.9E37 is returned.
The internal hardware skew is only a display adjustment for time-correlated
waveforms. The value returned is the average propagation delay of the trigger
lines through the intermodule bus circuitry. The value is for reference only
because the value returned by TTIMe includes the internal hardware skew
represented by HTIMe.
Returned Format [:INTermodule:HTIMe]
<value_1>,<value_2>,<value_3>,<value_4>,<value_5><NL>
<value_1> Skew for logic analyzer (real number)
<value_2> Skew for oscilloscope (real number)
Example OUTPUT XXX;":IN TERMODULE:HT IME?"
INPort
Command :INPort {{ON|1}|{OFF|0}}
The INPort command causes intermodule acquisitions to be armed from the
Input port.
Example OUTPUT XXX;":IN TERMODULE:IN PORT ON"
INTermodule Subsystem
HTIMe
12–6