RUNTil
Command :MACHine{1|2}:TWAVeform:RUNTil <run_until_spec>
The RUNTil (run until) command defines stop criteria based on the time
between the X and O markers when the trace mode is in repetitive. When
OFF is selected, the analyzer will run until either the STOP touch screen field
is touched, or, the STOP command is sent. Run until time between X and O
marker options are:
•Less Than (LT) a specified time value.
•Greater Than (GT) a specified time value.
•In the range (INRange) between two time values.
•Out of the range (OUTRange) between two time values
End points for the INRange and OUTRange should be at least 2 ns apart since
this is the minimum time at which data is sampled.
This command affects the timing analyzer only, and has no relation to the
RUNTil commands in the SLISt and COMPare subsystems.
<run_until_
spec>
{OFF|LT,<value>|GT,<value>|INRange<value>,<value>|
OUTRange<value>,<value>}
<value> real number
Examples OUTPUT XXX;":MACH INE1:TWAVEFO RM:RUNTIL GT, 80 0.0E−6"
OUTPUT XXX;": MACHINE1:TWA VEFORM:RUNTI L INRANGE, 4.5, 5. 5"
Query :MACHine{1|2}:TWAVeform:RUNTil?
The RUNTil query returns the current stop criteria.
Returned Format [:MACHine{1|2}:TWAVeform:RUNTil] <run_until_spec><NL>
Example OUTPUT XXX;":MA CHINE1:TWAVE FORM:RUNTIL? "
TWAVeform Subsystem
RUNTil
23–17