PATH
Command :TRIGger:[M ODE PATTer n;]PATH {CHA Nnel<N>}
The PATH command is used to select a trigger path for the subsequent
LOGic and LEVel commands. This command can only be used in the
PATTern trigger mode.
<N> An integer from 1 or 2
Example OUTPUT XXX;":TR IGGER:PATH CHA NNEL1"
Query :TRIGger:PATH?
The PATH query returns the current trigger path.
Returned Format [:TRIGger PATH] {CHANnel<N>}<NL>
Example OUTPUT XXX;":TR IGGER:PATH?"
SLOPe
Command :TRIGger:[M ODE EDGE;S OURce {CHANn el<N>};]SL OPe

{POSitive|NEGative}

The SLOPe command selects the trigger slope for the specified trigger
source. This command can only be used in the EDGE trigger mode.
<N> 1 or 2
Example OUTPUT XXX;":TR IG:SOUR CHAN1; SLOP POS"
TRIGger Subsystem
PATH
34-12