Table 12-1 INTermodule Parameter Values
Parameter Value
module An integer, 1 to 10 (3 through 10 unused)
index An integer, 1 to 10 (3 through 10 unused)
setting A numeric, – 1.0 to 1.0 in seconds.
:INTermodule
Selector :INTermodule
The INTermodule selector specifies INTermodule as the subsystem the
commands or queries following will refer to. Because the INTermodule
command is a root level command, it will normally appear as the first element
of a compound header.
Example OUTPUT XXX;":IN TERMODULE:HT IME?"
DELete
Command :DELete {ALL|OUT|<module>}
The DELete command is used to delete a module, PORT OUT, or an entire
intermodule tree. The <module> parameter sent with the delete command
refers to the slot location of the module. The logic analyzer is slot 1 and the
oscilloscope is slot 2.
<module> An integer, 1 through 10 (3 through 10 unused)
Example OUTPUT XXX;":IN TERMODULE:DE LETE ALL"
OUTPUT XXX;": INTERMODULE: DELETE 1"
INTermodule Subsystem
:INTermodule
12–5