LEVel
Command For EDGE trigger mode:
:TRIGger:[MODE EDGE;SOURce
{CHANnel<N>;]LEVel<value>
For PATTern trigger mode:
:TRIGger:[MODE PATTern;PATH
{CHANnel<N>};]LEVel<value>
The LEVel command sets the trigger level voltage for the selected source or
path. This command cannot be used in the IMMediate trigger mode. In
EDGE trigger mode, the SOURce command is used; in PATTern mode, the
trigger PATH is used for the trigger level source. The LEVel command in
PATTern trigger mode sets the high/low threshold for the pattern.
<N> An integer from 1 or 2
<value> Trigger level in volts
Example
For EDGE trigger mode:
OUTPUT XXX;": TRIG:MODE EDGE ;SOUR CHAN1;LE V 1.0"
For PATTern trigger mode:
OUTPUT XXX;": TRIG:MODE PATT ERN;PATH CHANN EL2;LEVEL 1.0"
TRIGger Subsystem
LEVel
34-8