MASTer
Command Syntax: :MACHine{1|2}:SFORmat:MASTer <clock_id>,

<clock_spec>

The MASTer clock command allows you to specify a master clock for a given
machine. The master clock is used in all clocking modes (Master, Slave, and
Demultiplexed). Each command deals with only one clock (J,K,L,M,N,P);
therefore, a complete clock specification requires six commands, one for
each clock. Edge specifications (RISing, FALLing, or BOTH) are ORed.
At least one clock edge must be specified.
<clock_id> {J|K|L|M|N|P}
<clock_spec> {OFF|RISing|FALLing|BOTH}
Example OUTPUT XXX;":MA CHINE2:SFORM AT:MASTER J, RIS ING"
Query :MACHine{1|2}:SFORmat:MASTer? <clock_id>
The MASTer query returns the clock specification for the specified clock.
Returned Format [:MACHine{1|2}:SFORmat:MASTer]<clock_id>,<clock_spec><NL>
Example OUTPUT XXX;":MA CHINE2:SFORM AT:MASTER? <cl ock_id>"
SFORmat Subsystem
MASTer
15–9