AUToload
Command :MMEMory:AUToload {{OFF|0}|{<auto_file>}}[,<msus>]
The AUToload command controls the autoload feature which designates a set
of configuration files to be loaded automatically the next time the instrument
is turned on. The OFF parameter (or 0) disables the autoload feature. A
string parameter may be specified instead to represent the desired autoload
file. If the file is on the current disk, the autoload feature is enabled to the
specified file.
<auto_file> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
<msus> Mass Storage Unit Specifier (not needed by 1660-series. 16500A <msus> is
accepted but no action is taken).
Examples OUTPUT XXX;":MMEM ORY:AUTOLOAD OFF"
OUTPUT XXX;": MMEMORY:AUTO LOAD ’FILE1_A’"
OUTPUT XXX;": MMEMORY:AUTO LOAD ’FILE2 ’,INTERNAL0"
Query :MMEMory:AUToload?
The AUToload query returns 0 if the autoload feature is disabled. If the
autoload feature is enabled, the query returns a string parameter that
specifies the current autoload file. The appropriate slot designator is
included in the filename and refers to the slot designator A for the logic
analyzer or B for the oscilloscope. If the slot designator is _ (underscore)
the file is for the system.
Returned Format [:MMEMory:AUToload] {0|<auto_file>},<msus><NL>
MMEMory Subsystem
AUToload
11–8