Table 13-1 Machine Parameter Values
Parameter Values
arm_source {RUN|INTermodule|MACHine{1|2}}
pod_list {NONE|<pod num>[,<pod num>]...}
pod_num {1|2|3|4|5|6|7|8}
arm_level An integer from 1 to 11 representing sequence level
machine_name A string of up to 10 alphanumeric characters
res_id <state_terms> for state analyzer or
{<state_terms>|GLEDge{1|2}} for timing analyzer
new_text A string of up to 8 alphanumeric characters
state_terms {A|B|C|D|E|F|G|H|I|J|RANGE{1|2}|TIMER{1|2}}
res_terms {<res id>[,<res id>]...}
MACHine Selector :MACHine<N>
The MACHine <N> selector specifies which of the two analyzers (machines)
available in the 1660-series logic analyzer the commands or queries following
will refer to. Because the MACHine<N> command is a root level command, it
will normally appear as the first element of a compound header.
<N> {1|2} (the machine number)
Example OUTPUT XXX; ":MACHINE1:NAME ’TIMING’"
MACHine Subsystem
MACHine
13–4