Query :MACHine{1|2}:SWAVeform:TAKenbranch?
The TAKenbranch query returns the current setting.
Returned Format [:MACHine{1|2}:SWAVeform:TAKenbranch] {STORe|NOSTore}<NL>
Example OUTPUT XXX;":MA CHINE2:SWAVE FORM:TAKENBR ANCH?"
TPOSition
Command :MACHine{1|2}:SWAVeform:TPOSition
{STARt|CENTer|END|POSTstore,<percent>}
The TPOSition command allows you to control where the trigger point is
placed. The trigger point can be placed at the start, center, end, or at a
percentage of post store. The post store option is the same as the User
Defined option when setting the trigger point from the front panel.
The TPOSition command is only available when the acquisition mode is set to
manual.
<percent> integer from 1 to 100
Example OUTPUT XXX;":MA CHINE2:SWAVE FORM:TPOSITI ON CENTER"
SWAVeform Subsystem
TPOSition
18–10