<block_data> <block_length_specifier><section>
<block_length_
specifier>
#8<length>
<length> The total length of all sections in byte format (must be represented with 8
digits)
<section> <section_header><section_data>[<section_data>...]
<section_
header>
16 bytes in the following format:10 bytes for the section name 1 byte
reserved 1 byte for the module ID code (32 for the 1660-series logic analyzer)
4 bytes for the length of section data in number of bytes that, when
converted to decimal, specifies the number of bytes contained in the section.
The RTC_INFO section is described in the "RTC_INFO Section Description."
<section_data> Format depends on the section.
The total length of a section is 16 (for the section header) plus the length of the
section data. So when calculating the value for <length>, dont forget to
include the length of the section headers.
Example OUTPUT XXX;"SET UP" <block_dat a>
Query :SYStem:SETup?
The SYStem:SETup query returns a block of data that contains the current
configuration to the controller.
Returned Format [:SYStem:SETup] <block_data><NL>
Example See "Transferring the logic analyzer configuration" in Chapter 36,
"Programming Examples" for an example.
DATA and SETup Commands
SYSTem:SETup
26–16