CHAPTER 10: Using Management and Serial Control Cards

10.4.2DISPLAY FLASH ROM STATUS

When you choose option 2 from the main menu, you will be prompted to enter a channel address. Enter a remote address or leave the field blank for the local channel (that is, for the Management Card itself). The firmware type and current firmware-revision level of the selected Card—which can be any type of ServSwitch Multi Card—will be displayed as shown below.

Display Flash ROM Status

Channel address [0-H]:

Pos

Flash Type FW Rev

---

---------- ------

1

XPIQ

-NA-

2Available

3Available

4Available

5Available

6Available

7Available

8Available

9Available

The “Pos” column shows which “slot” in the Card’s memory a firmware program is stored in: Management Cards have nine of these, numbered 1 through 9; all other Cards have only one, numbered 1. The “Flash Type” indicates what type of Card the program is designed for—see Note 2 on the previous page for explanations of what these abbreviations mean—or says “Available” if the slot is empty. The “FW Rev” column indicates the revision level of the program, or says “–NA–” if (as is the case with the Management Card/XPIQ firmware in slot one) the firmware can’t be transmitted to any other Card.

123

Page 124
Image 124
Black Box KV162A manual 123