Black Box KV162A manual Servswitch Multi, B Editing Computer-Channel Configurations

SERVSWITCH™ MULTI

To adjust the ID window visually, starting from the Channel-List Menu:

1.Highlight the desired channel.

2.Press [F3].

3.Adjust the ID window using these keys:

•Use the [+] and [–] keys on the shared keyboard to set window width;

•Use the spacebar to change text size;

•Use the [PgUp] (page up) key to set background color;

•Use the [PgDn] (page down) key to set text color;

•Use the keyboard’s (not the keypad’s) [↑], [↓], [←], and [→] (arrow) keys to set window position (hold down [Shift] while you do so to move the window in smaller increments).

When you’re finished, press [Enter] to save your changes or [Esc] to abort them.

9.3.1.B Editing Computer-Channel Configurations

At the Channel-List Menu, take these steps to reconfigure an existing computer channel:

1.Highlight the channel you want to edit. To quickly edit the name and address only, press [F4]. To change the settings of any other options, press [F2]. (The options you can edit are the same as those whose initial values you can set by following the steps in Section 9.3.1.A.)

2.Make your desired changes to the channel’s configuration, then press [Enter] to save the changes or [Esc] to abort them.

9.3.1.C Deleting Computer-Channel Configurations

At the Channel-List Menu, take these steps to delete a computer-channel configuration:

1.Highlight the channel you want to delete and press the [Del] key.

2.Press [Enter] to confirm the deletion or [Esc] to abort it.

108