Black Box KV162A manual Using the On-Screen Display Uicd Consoles Only

	CHAPTER 9: Using the On-Screen Display (UICD Consoles Only)
	Table 9-2. Administrator options available at the Channel-List Menu.
Press This Key
Sequence...	...To Do This
[F1]	Get context-sensitive help.
[F2]	Bring up the channel-setup menu, where you can configure the selected channel’s
	name, address, scanning, and ID-window options.
[F3]	Configure the on-screen ID window:
	Use the [+] and [–] keys on the shared keyboard to set window width;
	Use the spacebar to change text size;
	Use the [PgUp] (page up) key to set background color;
	Use the [PgDn] (page down) key to set text color;
	Use the [↑], [↓], [←], and [→] (arrow) keys* to set window position (hold down
	[SHIFT] while you do so to move the window in smaller increments);
	Press [Enter] to save your completed configuration.
[F4]	Quickly edit the name or address of the selected channel.
[F10]	Log out of the ServSwitch Multi system. The user-login screen will appear; you must
	log back in to the system to continue operation.
[F11]	See more options.
[Insert]	Add a new channel to the menu.
[Delete]	Remove the selected channel from the menu.
[Enter]	Switch to the highlighted channel.
[Alt] + [Enter]	Switch to the highlighted channel in privacy mode. For more information on privacy
	mode, refer to Section 8.10.
[Alt] + [Tab]	Cycle through the available menus.

*On the keyboard, not the keypad. At the time of this writing, the arrow keys on the keypads of IBM and Sun type

computers are not recognized.

109