Black Box KV162A manual KV2505 Cable will have, KV2515, KV2545, and KV2585 Cables will have

CHAPTER 3: Installing User-Interface Cards, User Cables, and Console Devices

3.3.1FOR IBM STYLE KEYBOARD AND MOUSE

If you are using an IBM PS/2 or PC/AT style keyboard and a PS/2 or serial mouse at a given console, the User Cable you’ll need will be labeled KV2505, KV2515, KV2545, or KV2585 depending on the options you ordered (see Table 3-1 at the start of Section 3.3). The cable will have these console-end connectors:

KV2505 Cable

will have:

KV2515, KV2545, and KV2585 Cables

will have:

HD15 Female	5-Pin DIN Female
to VGA Monitor	to PC/AT Keyboard

HD15 Female	5-Pin DIN Female
to VGA Monitor	to PC/AT Keyboard

6-Pin Mini-DIN Female	6-Pin Mini-DIN Female
to PS/2 Keyboard	to PS/2 Mouse
	(yellow band)

6-Pin Mini-DIN Female	6-Pin Mini-DIN Female
to Keyboard	to PS/2 Mouse
	(yellow band)

DB9 Female

to Serial Mouse

DB9 Male	DB9 Male
to Serial Mouse	to Other
(yellow band)	Serial Device

RCA Female (Mono)	RCA Female (Stereo)
to Microphone	to Speakers
(blue band)	or Headphones

To install your cabling and console equipment at each IBM type secondary console, first plug the User Cable’s HD62 connector into the matching connector on the User-Interface Card. When you’re sure the connection is firmly seated, secure it by tightening the associated thumbscrews.

Now plug the cables from your keyboard, mouse, and monitor into the matching connectors on the User Cable. (You might be able to use your non-multisync RS/6000, SGI, or HP monitor instead of a VGA monitor; see Section 3.3.4.) If the User Cable is an audio type, it will have three additional connectors: two RCA® jacks for a mono microphone and stereo speakers or headphones, and a DB9 male connector for a serial device. Attach any appropriate equipment as desired.

31