ICP-CC488 Installation Guide Index
EN 115
Night Arm Station | 91 |
Programming Key | 91 |
TF008 Plug Pack | 91 |
Output Event Type |
|
AC Fail | 72 |
AC Mains 60 Hz or 50 Hz | 75 |
Alarm When In AWAY Mode | 73 |
Alarm When In STAY Mode | 73 |
Any Areas Armed | 75 |
Any Areas Disarmed | 75 |
Area 1 Codepad Data Terminal | 75 |
Area 1 Has Zone Unsealed | 75 |
Area 1 In Alarm | 75 |
Area 1 Is Armed | 75 |
Area 1 Is Disarmed | 75 |
Area 2 Codepad Data Terminal | 75 |
Area 2 Has Zone Unsealed | 75 |
Area 2 In Alarm | 75 |
Area 2 Is Armed | 75 |
Area 2 Is Disarmed | 75 |
Armed In AWAY Mode | 71 |
Armed In STAY Mode | 71 |
Auto Arm | 71 |
AUX Power Supply Fail | 72 |
Codepad Duress Alarm | 73 |
Codepad Fire Alarm | 73 |
Codepad Medical Alarm | 73 |
Codepad Panic Alarm | 73 |
Codepad Tamper | 73 |
Communications Failure | 74 |
Communications Failure After 3 Unsuccessful Calls | |
.............................................................................. | 74 |
Day Alarm Enabled | 72 |
Day Alarm Latching | 72 |
Day Alarm Resetting | 72 |
Dialer Active | 74 |
Dialer Disabled | 74 |
EDMSAT - Satellite Siren | 71 |
Entry Warning | 71 |
Entry Warning + Day Alarm Resetting | 72 |
Exit Warning | 71 |
Exit Warning Finished | 71 |
Exit Warning With All Zones Sealed Or Entry |
|
Warning | 71 |
Fire Alarm Latching | 73 |
Fire Alarm Resetting | 73 |
Fire Alarm Verification | 74 |
Global Chime | 75 |
Horn Speaker | 73 |
Horn Speaker Monitor Fail | 72 |
71 | |
72 | |
Low Battery | 72 |
Mimic System Fault | 73 |
Mimic Zone 1 | 75 |
Mimic Zone 2 | 75 |
Mimic Zone 3 | 75 |
Mimic Zone 4 | 75 |
Mimic Zone 6 | 75 |
Mimic Zone 7 | 75 |
Mimic Zone 8 | 75 |
Radio Control Output 1 | 74 |
Radio Control Output 1 - Not In AWAY Mode74 | |
Radio Control Output 2 | 74 |
Radio Control Output 2 - Not In AWAY Mode74 | |
Remote Control 1 | 74 |
Remote Control 2 | 74 |
Remote Control 3 | 74 |
Ring Detect | 74 |
Sensor Watch Alarm | 73 |
Silent Alarm | 73 |
Sirens Running | 73 |
Strobe Operating | 73 |
System Armed | 71 |
System Disarmed | 71 |
Telephone Line Fail | 72 |
Zone Not Sealed | 75 |
Zone Not Sealed After Exit Time | 75 |
Outputs |
|
One Shot Polarities | 77 |
Pulsing Polarities | 77 |
Redirecting Output To Codepad Buzzer | 71 |
Turning On/Off | 30 |
P |
|
Panic Alarm | 16 |
Partitioning |
|
Master Partitioned Codepad Operations | 84 |
User Code Allocations | 86 |
Zone Allocations | 85 |
Partitioning Options 1 |
|
First To Open/Last To Close Reporting | 85 |
Main Codepad To Display Data Only For Area 185 | |
Partitioning Options 2 |
|
