| Zone Information |
|
|
EN 58
Figure 13: Split EOL Resistors Using Two N/O Contacts
1
2 | 4 | 5 |
3
67
88
1 | – +12 V | 5 | – EOL 6K8 |
2 | – Zone Input | 6 | – EOL 1K5 |
3 | – Zone | 7 | – EOL 4K7 |
4 | – EOL 3k3 | 8 | – N/O |
14.3Zone Programming
The programming information for each zone is stored in seven locations divided into three groups. The first three locations determine how the zone operates, the next two locations set up a number of zone options, and the last two locations store the dialer reporting information for the zone.
Zone Operating Information
These locations store the Zone Type (for example,
14.3.3Zone Pulse Count, and 14.3.4 Zone Pulse Count Time on pages 59 through 61 for more information.
Zone Options
These two locations allow you to select from a number of options. Refer to Sections 14.3.5 Zone Options 1 on page 61 and 14.3.7 Zone Options 2 on page 63 for more information.
Zone Reporting Information
This information includes the locations for the Zone Report Code and the Zone Dialer Options.
The Zone Report Code determines if the control panel sends Alarm Reports for the zone. Refer to Section 14.3.8 Zone Report Code on page 64 for more information.
The Zone Dialer Options location enables you to specify how a zone reports to a base station receiver. Refer to Section 14.3.9 Zone Dialer Options on page 64 for more information.
14.3.1 ICP-CC488 Zone Defaults
Location 267 to 378
| Location | Default |
Zone #01 (Default = |
|
|
Zone Type | 267 | 2 |
Zone Pulse Count | 268 | 0 |
Zone Pulse Count Time | 269 | 0 |
Zone Options 1 | 270 | 1 |
Zone Options 2 | 271 | 14 |
Report Code | 272 | 1 |
Dialer Options | 273 | 1 |
Zone #02 (Default = Handover) |
|
|
Zone Type | 274 | 1 |
Zone Pulse Count | 275 | 0 |
Zone Pulse Count Time | 276 | 0 |
Zone Options 1 | 277 | 1 |
Zone Options 2 | 278 | 14 |
Report Code | 279 | 1 |
Dialer Options | 280 | 1 |
Zone #03 (Default = Handover) |
|
|
Zone Type | 281 | 1 |
Zone Pulse Count | 282 | 0 |
Zone Pulse Count Time | 283 | 0 |
Zone Options 1 | 284 | 1 |
Zone Options 2 | 285 | 14 |
Report Code | 286 | 1 |
Dialer Options | 287 | 1 |
Zone #04 (Default = Handover) |
|
|
Zone Type | 288 | 1 |
Zone Pulse Count | 289 | 0 |
Zone Pulse Count Time | 290 | 0 |
Zone Options 1 | 291 | 1 |
Zone Options 2 | 292 | 14 |
Report Code | 293 | 1 |
Dialer Options | 294 | 1 |
Zone #05 (Default = Instant) |
|
|
Zone Type | 295 | 0 |
Zone Pulse Count | 296 | 0 |
Zone Pulse Count Time | 297 | 0 |
Zone Options 1 | 298 | 1 |
Zone Options 2 | 299 | 14 |
Report Code | 300 | 1 |
Dialer Options | 301 | 1 |
Zone #06 (Default = Instant) |
|
|
Zone Type | 302 | 0 |
Zone Pulse Count | 303 | 0 |
Zone Pulse Count Time | 304 | 0 |
Zone Options 1 | 305 | 1 |
Zone Options 2 | 306 | 14 |
Report Code | 307 | 1 |
Dialer Options | 308 | 1 |
